DokuWiki Bitnami Stack – an installer which deploys DokuWiki and all that's necessary to run it (Apache, PHP). Available for Windows, Linux, Mac x86, Mac PPC, Solaris x86 and Solaris SPARC. Bitnami DokuWiki Stack Installers Bitnami native installers automate the setup of a Bitnami application stack on Windows, Mac OS and Linux. Each installer includes all of the software necessary to run out of the box (the stack). The process is simple; just download, click next-next-next and you are done! SheepShaver is an open source PowerPC Apple Macintosh emulator. Using SheepShaver (along with the appropriate ROM image) it is possible to emulate a PowerPC Macintosh computer capable of running Mac OS 7.5.2 through 9.0.4. Builds of SheepShaver are available for Mac OS X, Windows and Linux. Apple's recently released OS upgrade to v10.11, named El Capitan, causes issues with MS Office for Mac versions 2011 and 2016. Wide spread reporting indicates problems with all Office for Mac (2011 / 2016) applications including Word, Excel, Outlook, etc. I'm running a local version of DokuWiki on a mac (OS X Yosemite) using MAMP (i.e., simulated local webserver). My wiki runs fine, but I cannot link to a local file on my mac. I added 'file' (without quotes) to conf/scheme.local.conf and used the following syntax, which creates a link rather than plain text on the wiki page.
Information about how to compile the PyMOL from the open source code can be found on the PyMOL Wiki.
Regarding Compilation under Microsoft Windows
Microsoft Windows, as a proprietary closed-source operating system, is not a supported compilation environment for Open-Source PyMOL. While Windows compilation is of course possible and allowed, it is defined as 'beyond scope' for the open-source project. Thus, to use current versions of PyMOL on Windows, you must either sponsor the project in order to access precompiled executables or create, maintain, and support your own port for Windows, preferably via Cygwin .
Regarding Compilation under Mac OS X
Although Mac OS X is a proprietary closed-source operating system, compilation of PyMOL is supported on Mac OS X under the X11/Fink environment, since that setup is directly compatible with what you'd find on Linux or FreeBSD. Do note however that the resulting executable will not have the integrated single-window user interface available in MacPyMOL.
This resource explains how to install a Raspberry Pi operating system image on an SD card. You will need another computer with an SD card reader to install the image.
Before you start, don't forget to check the SD card requirements.
Using Raspberry Pi Imager
Raspberry Pi have developed a graphical SD card writing tool that works on Mac OS, Ubuntu 18.04 and Windows, and is the easiest option for most users as it will download the image and install it automatically to the SD card.
- Download the latest version of Raspberry Pi Imager and install it.
- If you want to use Raspberry Pi Imager on the Raspberry Pi itself, you can install it from a terminal using
sudo apt install rpi-imager.
- If you want to use Raspberry Pi Imager on the Raspberry Pi itself, you can install it from a terminal using
- Connect an SD card reader with the SD card inside.
- Open Raspberry Pi Imager and choose the required OS from the list presented.
- Choose the SD card you wish to write your image to.
- Review your selections and click 'WRITE' to begin writing data to the SD card.
Doku Mac Os Download
Note: if using the Raspberry Pi Imager on Windows 10 with Controlled Folder Access enabled, you will need to explicitly allow the Raspberry Pi Imager permission to write the SD card. If this is not done, Raspberry Pi Imager will fail with a 'failed to write' error.
Using other tools
Most other tools require you to download the image first, then use the tool to write it to your SD card.
Download the image
Official images for recommended operating systems are available to download from the Raspberry Pi website downloads page.
Alternative distributions are available from third-party vendors.
You may need to unzip .zip downloads to get the image file (.img Banana jumble mac os. ) to write to your SD card.
Doku Mac Os X
Note: the Raspberry Pi OS with desktop image contained in the ZIP archive is over 4GB in size and uses the ZIP64 format. To uncompress the archive, a unzip tool that supports ZIP64 is required. The following zip tools support ZIP64:
- 7-Zip (Windows)
- The Unarchiver (Mac)
- Unzip (Linux)
Writing the image
Raspberry Pi have developed a graphical SD card writing tool that works on Mac OS, Ubuntu 18.04 and Windows, and is the easiest option for most users as it will download the image and install it automatically to the SD card.
- Download the latest version of Raspberry Pi Imager and install it.
- If you want to use Raspberry Pi Imager on the Raspberry Pi itself, you can install it from a terminal using
sudo apt install rpi-imager.
- If you want to use Raspberry Pi Imager on the Raspberry Pi itself, you can install it from a terminal using
- Connect an SD card reader with the SD card inside.
- Open Raspberry Pi Imager and choose the required OS from the list presented.
- Choose the SD card you wish to write your image to.
- Review your selections and click 'WRITE' to begin writing data to the SD card.
Doku Mac Os Download
Note: if using the Raspberry Pi Imager on Windows 10 with Controlled Folder Access enabled, you will need to explicitly allow the Raspberry Pi Imager permission to write the SD card. If this is not done, Raspberry Pi Imager will fail with a 'failed to write' error.
Using other tools
Most other tools require you to download the image first, then use the tool to write it to your SD card.
Download the image
Official images for recommended operating systems are available to download from the Raspberry Pi website downloads page.
Alternative distributions are available from third-party vendors.
You may need to unzip .zip downloads to get the image file (.img Banana jumble mac os. ) to write to your SD card.
Doku Mac Os X
Note: the Raspberry Pi OS with desktop image contained in the ZIP archive is over 4GB in size and uses the ZIP64 format. To uncompress the archive, a unzip tool that supports ZIP64 is required. The following zip tools support ZIP64:
- 7-Zip (Windows)
- The Unarchiver (Mac)
- Unzip (Linux)
Writing the image
Doku Moshi Chapter 14
How you write the image to the SD card will depend on the operating system you are using.
Boot your new OS
You can now insert the SD card into the Raspberry Pi and power it up.
For the official Raspberry Pi OS, if you need to manually log in, the default user name is pi, with password raspberry. Remember the default keyboard layout is set to UK.
Doku Mac Os Catalina
You should change the default password straight away to ensure your Raspberry Pi is secure.
